RIPv2验证
版权声明：原创作品，谢绝转载！否则将追究法律责任。 |
 RIPv2验证
在R1,R2上进行配置
R1
conf t int l 0 ip ad 4.4.4.4 255.255.255.255 int s 0 ip ad 10.1.1.1 255.255.255.0 clock rate 64000 ip rip authentication key-chain RIP_authen 在接口上进行验证 ip rip authentication mode md5 定义验证方法（md5/text） no shut exit key chain RIP_authen 定义key chain的名字 key 1 定义key的标识符 key-string pass 定义验证码 router rip ver 2 no au net 4.0.0.0 net 10.0.0.0 R2
conf t int l 0 ip ad 5.5.5.5 255.255.255.255 int s0 ip ad 10.1.1.2 255.255.255.0 no shut ip authentication key-chain RIP_authen ip authentication mode md5 exit key chain RIP_authen key 1 key-string pass router rip ver 2 no au net 10.0.0.0 net 5.0.0.0 exit R1#sh ip route Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set
4.0.0.0/32 is subnetted, 1 subnets
C 4.4.4.4 is directly connected, Loopback0 5.0.0.0/32 is subnetted, 1 subnets R 5.5.5.5 [120/1] via 10.1.1.2, 00:00:03, Serial0 10.0.0.0/24 is subnetted, 1 subnets C 10.1.1.0 is directly connected, Serial0 r2#sh ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set
4.0.0.0/32 is subnetted, 1 subnets
R 4.4.4.4 [120/1] via 10.1.1.1, 00:00:16, Serial0 5.0.0.0/32 is subnetted, 1 subnets C 5.5.5.5 is directly connected, Loopback0 10.0.0.0/24 is subnetted, 1 subnets C 10.1.1.0 is directly connected, Serial0 R1#ping 5.5.5.5 Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 5.5.5.5, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 60/60/60 ms r2#ping 4.4.4.4
Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 4.4.4.4, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 60/61/64 ms 本文出自 “穿过地狱去看海” 博客，谢绝转载！ 本文出自 51CTO.COM技术博客 |
cj231210
博客统计信息
热门文章
最新评论
友情链接
