Committed Access Rate(CAR)
版权声明:原创作品,谢绝转载!否则将追究法律责任。 |
![]() 对R1到R3的流量使用CAR进行分类和限速
对于ICMP的流量限速5MBPS,normal burst size为6000,exceed burst size为8000,速率以内的设置优先级为5并传输,超过速率设置优先级为0后传输 对TCP的流量限速为8MBPS,normal vurst size为10000,exceed burst size为20000,速率以内的设置优先级为5并传输,超过速率丢弃 其他的流量限速为9MBPS,normal burst size 为8000, exceed burst size 为10000,速率内的传输,超过的丢弃 R1 conf t int f 0/0 ip ad 10.1.1.1 255.255.255.0 no shut router rip net 10.0.0.0 R2
conf t int f 0/0 ip ad 10.1.1.2 255.255.255.0 no shut int f 1/0 ip ad 10.1.2.2 255.255.255.0 no shut exit access 100 permit icmp any any access 101 permit tcp any any int f 0/0 rate-limit input access-group 100 5000000 6000 8000 conform-action set-prec-transmit 5 exceed-action set-prec-transmit 0 rate-limit input access-group 101 8000000 10000 20000 conform-action set-prec-transmit 5 exceed-action drop rate-limit input 9000000 8000 10000 conform-action transmit exceed-action drop no shut exit router rip net 10.0.0.0 line vty 0 4 password cisco login end 校验
在R1上分别对R2做PING(icmp) ,TRACEROUTE(udp),TELNET(tcp)命令 1#telnet 2.2.2.2 Trying 2.2.2.2 ... Open User Access Verification Password:
R2> R2>quit [Connection to 2.2.2.2 closed by foreign host]
R1#trace 2.2.2.2 Type escape sequence to abort.
Tracing the route to 2.2.2.2 1 10.1.1.2 88 msec * 68 msec
R1#ping 2.2.2.2 Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 4/32/88 ms 在R2上观察CAR起的作用 R2#sh int f 0/0 rate-limit FastEthernet0/0 Input matches: access-group 100 params: 5000000 bps, 6000 limit, 8000 extended limit conformed 5 packets, 570 bytes; action: set-prec-transmit 5 exceeded 0 packets, 0 bytes; action: set-prec-transmit 0 last packet: 4596ms ago, current burst: 0 bytes last cleared 00:00:29 ago, conformed 0 bps, exceeded 0 bps matches: access-group 101 params: 8000000 bps, 10000 limit, 20000 extended limit conformed 26 packets, 1566 bytes; action: set-prec-transmit 5 exceeded 0 packets, 0 bytes; action: drop last packet: 14512ms ago, current burst: 0 bytes last cleared 00:00:29 ago, conformed 0 bps, exceeded 0 bps matches: all traffic params: 9000000 bps, 8000 limit, 10000 extended limit conformed 3 packets, 180 bytes; action: transmit exceeded 0 packets, 0 bytes; action: drop last packet: 7416ms ago, current burst: 0 bytes last cleared 00:00:29 ago, conformed 0 bps, exceeded 0 bps 本文出自 “穿过地狱去看海” 博客,谢绝转载! 本文出自 51CTO.COM技术博客 |




cj231210
博客统计信息
热门文章
最新评论
友情链接

