使用Modular QoS CLI(MQC)基于FR的DLCI号对包进行分类
版权声明:原创作品,谢绝转载!否则将追究法律责任。 |
![]() 实验要求
在 R2上基于PVC来分配带宽,PVC201可以分得20%的带宽,PVC203分得55%的带宽 R1
conf t int s2/0 ip ad 10.1.1.1 255.255.255.0 encap f no arp f no frame inver frame map ip 10.1.1.2 102 b frame map ip 10.1.1.3 102 b no shut end R2
conf t int s 2/0 ip ad 10.1.1.2 255.255.255.0 encap f no arp f no frame inver frame map ip 10.1.1.1 201 b frame map ip 10.1.1.3 203 b no shut exit class-map match-all PVC201 步骤1 建立一个class map来表示网络流量 match fr-dlci 201 指定DLCI号作为匹配标准 class-map match-all PVC203 match fr-dlci 203 exit policy-map PVC 步骤2 创建一个policy map class PVC201 应用class map到policy map中 bandwidth percent 20 设定带宽的百分比 class PVC203 bandwidth percent 55 int s2/0 service-policy output PVC 步骤3 把policy map绑定到接口的出方向 end R3
conf t int s 2/0 ip ad 10.1.1.3 255.255.255.0 encap f no arp f no frame inver frame map ip 10.1.1.1 302 b frame map ip 10.1.1.2 302 b no shut end 校验
R2#ping 10.1.1.1 Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 8/39/108 ms R2#ping 10.1.1.3 Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.1.3, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 8/51/176 ms R2#sh policy-map int s2/0 Serial2/0
Service-policy output: PVC
Class-map: PVC201 (match-all)
10 packets, 1040 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: fr-dlci 201 Queueing Output Queue: Conversation 265 Bandwidth 20 (%) Bandwidth 231 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 10/1040 (depth/total drops/no-buffer drops) 0/0/0 Class-map: PVC203 (match-all) 10 packets, 1040 bytes 5 minute offered rate 0 bps, drop rate 0 bps Match: fr-dlci 203 Queueing Output Queue: Conversation 266 Bandwidth 55 (%) Bandwidth 849 (kbps) Max Threshold 64 (packets) (pkts matched/bytes matched) 10/1040 (depth/total drops/no-buffer drops) 0/0/0 本文出自 “穿过地狱去看海” 博客,谢绝转载! 本文出自 51CTO.COM技术博客 |




cj231210
博客统计信息
热门文章
最新评论
友情链接

